Now it should still be low down on that list but I just needed to do something and as the plastic forms for the Chitin plates are actually one of those 'obstacles to progress' I regularly suffer from if I actually felt the urge to overcome this hurdle then I would be a fool to ignore where my mojo will take me.
I think that's one of the advantages of having numerous projects on the go, when one gets tedious it's really easy to switch to another project to maintain momentum. As it was I couldn't quite remember how to do these [I've done 10 spires so far!] so it was lucky I had a blog to go back for reference. I think the main spine is a bit ropey in places but the smaller ones came out pretty well and the hot melt glue didn't melt too much of them.
I drilled out the emitter ball too, I've found the second one so should I want to make another VSG it's possible, although I'll kick myself for not doing the two at the same time...
There's a curtain hook for the very tip of the spine and I'll be adding more down the inside. I put a Genestealer on the battlements for scale too.
All good fun, I need to pack out the plastic with PVA and tissue next, then a coating of tile adhesive/grout. I don't envisage this replacing any of my other projects but it's nice to take a break so I can make progress on it and return to the other ones afresh.
Tyranid Void Shield Generator Chapter 1. | part 1. | part 2. | part 3. | part 4. | part 5. | part 6. | part 7. | part 8. | part 9. |