Monday 27 January 2020

'nids part 273 - Tyranid Warrior and Warrior to Hive Guard Conversion - basecoats

Built and based for a while now it felt about time to add some paint to my Warrior to Hive Guard conversions. Even if it was just a basecoat it's one step further, one less thing to do.


It's a tedius job, something I used to make so much easier by undercoating them bonewhite and filling in the reds. Now I seem to start with the red - the least representative colour on the model and try to be neat with everything else, not to mention I cover up most of the red primer anyway!


As you can see the bonewhite basecoat is pretty ropey but I'm fine with that, it;s getting two coats of wash so doesn't need #2thincoats In fact any paint showing through the base just adds more texture ultimately.


The Tyranid Warrior was up next. No doubt I'll try and treat these as a unit for painting purposes. I've actually fished out my existing Warriors and Hive Guard and will look at any potential fixes. 


Certainly some base edges have become a little chipped but I'm also painfully aware that they're still afflicted with Citadel Purity Seal frosting. Maybe not now but I will definitely one day re-paint the red fleshy bits that are are damaged and I know I can do the chitin much better now so I'll probably repaint that.


The bone colour only needs additional highlights but there's no urgency just now. I've lined up the five Devgaunts to 'bone up on' next and then the Rippers. All of these are just inbetween things - tasks that need doing but in themselves are tedious so if I fit them in among other projects when I finally focus my attention it'll just be the fun bits that actually feels like painting, not necessarily like putting paint on, if you follow. Otherwise I'll be tackling my Blood Bowl Ogre next...

6 comments:

  1. Replies
    1. Cheers Mike, you know me, I just keep plugging away at this stuff. Not the fastest, not the best but good steady progress is laudable.

      Delete
  2. Cool conversion! Especially the claw carapace and the use of flesh hooks on the cannon is inspired!

    ReplyDelete
    Replies
    1. The carapace was the best I could do at the time. Now at least I saved myself the risk of injury with the judicious use of pliers to remove the interior of the claw. It'd be nice to finally have a set of 6 but it'll definitely highlight the progress my painting has made since I first created them.

      Delete
  3. I like those Hive Guard conversions mate. As for Purity Seal, I threw mine away and now use Army Painter Matt Varnish Spray, never had any frosting issues! Recommend it for peace of mind!

    ReplyDelete
    Replies
    1. I think I'm done with any spray varnishes, too many times I've been burnt. That said I still have a can of Purity Seal and should I ever do a snow themed board I would use it on that! Failing that it'd be a great sealant for MDF terrain or even half-press the nozzle so it sprays a bit 'splattery' and create a texture on terrain or a 'key' for that plastic that's always a bit dubious - I have a Mega Bloks Plasma Hatcher it'd work on.

      It's like my accursed Seraphim Sepia, I know that's going to go all crusty so I use it on extreme weathering now. There's always a use for $hit products, even if it's not their intended use ;)

      Delete