Friday 1 May 2020

'nids part 275 - Tyranid Warrior Termagants, Rippers - MOAR basecoats and shades

Afternoon #warmongers and I've been #paintingwarhammer on those Tyranid models. I was getting all the chitin plates basecoated. The 5 Devgaunts, some made from Hormagaunt 'chassis'.


The Rippers


The lone Warrior


The Hive Guard




And I got the wash done as well. With the motivational challenge of my Deathwing Knights it is always handy to have something simple but with significant impact to a model up your sleeve. 


Washing all these 'nids, alongside all the metallic edging for my Adeptus Titanicus titans gave me a huge hit of progress on a lot of models. It also put me in a position where these can be moved onto the next stage as and when I feel overwhelmed by the Deathwing.


It was however not without issue. I had been using my Valejo sepia wash, mixing in some Instar Water+ to thin it down as I'd got the same crusty deposit in past applications as I did with Seraphim Sepia.


It didn't quite solve the problem, as you can see on the head crest it's still there, but not as bad as Seraphim Sepia. You would expect me to be livid at this point but as I'm running a Strong Tone wash over the top of it I don't think this will be a problem in the end.




Hive Guard conversions got the same treatment.


And there were deposits int he crevices also. I think it's the heavily recessed areas where the wash pools.


Some have suggested it's the separation of the matting agent, who knows?


I quickly remembered to wash these two in Soft Tone as well.


You can see that there was not the same problem with the Army Painter washes.


The Valejo wash does describe itself as a dipping wash so perhaps applying it with a brush is not the best application. Maybe you treat it the same way as an Army Painter Quickshade, although I believe they're much thicker. Doesn't really matter though, I'll just keep on painting.

2 comments:

  1. I can't imagine how application would cause the kind of problems you have faced with sepia. I get the feeling a mat varnish at the end would probably be a decent fix, but gosh it must be frustrating.

    ReplyDelete
    Replies
    1. So many theories crop up regarding this, usually 'it's too thick', 'you've thinned it with contaminated water', 'bad batch', 'you've not shook it enough' etc. Luckily this isn't an issue for this application. The Valejo is less problematic as well. It's not as frustrating as it could be because I'm aware of the risk and how to mitigate them should they arise. Ultimately I just want 'wash and go' products - things I can just open up and use without worry. Any product that starts to require hoops and I bin it off [Purity Seal, Seraphim Sepia]!

      Delete