Wednesday 20 October 2021

Imperial Knight - Armiger Helverins shading #Dreadtober part 7

Afternoon #warmongers and #warhammercommunity it's the 'seventh' of #Dreadtober and I'm continuing my #Imperial Knights Armiger Helverins. I'd been avoiding the marble tiles, I'm not sure why, my marbling skills had been pretty successful so far. But I girded my loins and gave it a go.

 

Some smooth Bonewhite lines, like organic lightning.


I tried to fade things a bit so it similar to what I'd done before. Naturally, I didn't refer too closely to those previous examples, even though I was attempting to recreate them.


I added some shading in and managed to achieve what I feel is the worst marble out of the three I've attempted so far - yay me!


I'm not entirely sure what the problem is but it just doesn't sit right with me. Maybe the pattern is too big, or the contrast is too high but it's not what I expected. Fudge it, I can live with this sort of underachievement.


Meanwhile, I'm adding sepia shading all over the metallics and debating whether I'll sponge any additional Runelord Brass onto it...


And I don't think I will. Having compared it to my previous Armigers, which were almost pure Warplock Bronze on the legs, making the legs any lighter just feels unnecessary.

 

Carapaces also got shaded and also the reds got highlighted.


And we're done. Well, not done, there's still loads more to do. But the majority of the highlights are there, so it's Blessed Verdigris next and then highlighting the yellow.


So, a mixed bag of progress, success and some minor disappointment but getting there.

Friday 15 October 2021

Imperial Knight - Armiger Helverins Runelord Brass #Dreadtober part 6

Afternoon #warmongers and #warhammercommunity it's the 'sixth' of #Dreadtober and I'm continuing my #Imperial Knights Armiger Helverins. It's the third set of highlights - Runelord Brass. Ordinarily this would be a mix VGC Polished Gold and gun metal but the new pot of Runelord Brass gave me a chance to experiment.




It would definitely be a better highlight drybrushed directly on top of VGC Rough Iron or Warplock Bronze, now shade wash necessary.

 
As it is I'm not sure how it looks. The Hammered copper is very Red and the Retributor Armour is very yellow and then the Runelord Brass is desaturated. I'm going to add a AP Soft Tone wash to try to equalize things a little bit.


I'll then decide if it needs any more metallics on top.


I also need to add some gun metal nbit on the lower legs, it's the only place I use it. I have discovered the original Warglaives legs were possibly just Warplock Bronze on the lower sections, so that silver shin really stands out. It's also quite the difference to see the range of metallics on this Helverin in comparison.


As I have to do the red highlights on the carapace I thought it best to still keep the shoulders separate so I didn;t accidently catch the metal with red.


Guns are also highlighted, but I have to tidy them up in places and noticed some areas where the paint has already scratched off.


I was a little disheartened about how easily the paint was getting scratched off, thanks to the Simoniz matt black spray I primed it with, when clearly it's not a primer. Home Bargains has finally had a delivery of its £1.99 sprays and primers, it's too late now but at least I'll be OK if I need to do anything else. But back with the Helverins I needed to take a few days away from it to destress. However, I think the next update will be significant as I was actually then able to spend some real solid focused time on it to move them on. Sure, these look well on track and even the next update seems almost done but there is so much still left to do - highlights, all the weathering, decals, the battle damage, glow effects and finish off the bases. It's not as foregone as it may appear.

Tuesday 12 October 2021

Imperial Knight - Armiger Helverins Gold #Dreadtober part 5

Afternoon #warmongers and #warhammercommunity it's the 'fifth' of #Dreadtober and I'm continuing my #Imperial Knights Armiger Helverins. It's the second set of highlights - Retributor Armour.


Again, the gold is applied as scruffily as I can but it still takes an entire evening to get all the elements done.


I'm also leaving some areas untouched as I know that armour plates are going to cover them up. I think the leg plates will be glued on soon, when I'm doing the shadow washes as that will help define them more on the model.


I still need to do the marble tiles though... not to mention all the debris.


Can't wait to get to highlight the actual panels on these and start applying transfers too. 


Torso pieces, most of the highlights are done now, just the smoke stacks and some of the more protruding elements will be highlighted further.


Unlike Tyranids these smaller highlights do get quicker and easier, just because I do them so roughly it doesn't require much care and isn;t particularly time consuming.


The carapace weapons also got primed and I started to highlight them. Even at this stage I'm considering painting the barrels of the Helverin Autocannons silver. However, none of the Icarus Autocannons are silver so I'm not sure.


I use a tiny bit of silver on the legs of the Armigers, so there is a precedent to using some metallics that aren't brass or bronze. I 'm just undecided at this point. I may carry on and decided at the end. Until then it's Runelord Brass, next.

Friday 8 October 2021

Imperial Knight - Armiger Helverins Bronze #Dreadtober part 4

Afternoon #warmongers and #warhammercommunity it's the 'fourth' of #Dreadtober and I'm continuing my #Imperial Knights Armiger Helverins. VGC Hammered Copper, my slightly more red equivalent of Balthasar Gold is next. 


A mix of drybrushing, wetbrushing, stippling and any old way to get the paint on.


It's got another 4 or 5 coats of paint to go on over it so it can be rough as anything. Retributor Armour is next, then I'm going to try Runelord Brass, because I got a fresh pot with Imperium issue 2. 


Then a sepia wash and perhaps a Strong Tone wash afterwards. There may be an additional light sponge of Runelord Brass just for some additional nicks and scratches, we'll see.


Armour plates are fiddly and I did catch some of the coloured bits with metallics but I'm comfortable now with how I'll cover that up.


Carapaces were done too, still not 100% about the vents on the back sometimes. I suppose I could have deviated and painted them to match the full carapace but it's done now.


Rest of the torso quickly highlighted. Again, this is messy and most of it just needs one level of highlights just to help the shadow wash have some extra contrast for when the wash settles.


But, the wash will help even things out, so even the messiness now will be smoothed out eventually. Most of it is hidden, or overshadowed by the armour plates, so you can get away with a lot.


And the guns. Not just the Helverin autocannons, but a couple of Quad Guns [or two Twin Guns?], that I separated and magnetised. Add that to my Icarus Autocannons and now I can field all of my Armigers as Helverins, should I wish.


Retributor Armour is next. I know it's a lot of progress this first week, again because I gave myself a headstart. But, a lot of work still to do and it also allows me to take a night of should I need it so I don't feel pressured. Conversely I do want to finish early so I can have them ready if there is an instore Armies On Parade in Liverpool. It'd be my first time parading there and I'd love to have the full House Corvus group in it.


Wednesday 6 October 2021

Imperial Knight - Armiger Helverins chevrons #Dreadtober part 3

Afternoon #warmongers and #warhammercommunity it's the 'third' of #Dreadtober and I'm continuing my #Imperial Knights Armiger Helverins. I'm painting chevrons! I used a trusty wooden coffee stirrer to achieve this - cutting a 45 degree angle at one end, pencilling in a centre line and then placing the stirrer against it so I could rule either side of it and create each stripe. It's fiddly because it doesn't conform to the undulations in the surface but you have to make allowances. You may notice that the second from bottom yellow stripe is a bit chunkier than the rest. Yes, that was not planned. However, the House Raven full crest will go there so - happy accident it will help it fit and I can claim it WAS planned that way!


You may [or may not] note that these differ from standard house Raven chevrons in that they point backwards. The Official House Raven chevrons point forwards. As this is an off shoot of Raven - House Corvus, that explains it and I won't be doing the white edges of the black lines either.


I thought a chevron collar would be interesting on this one. Now I've done it I'm not entirely sure it works but I'll persevere with it because the quality is there, even if I'm not convinced of the result.


Let me know what you think, if it looks odd or not.


I also did all the armour plates and made some random decisions about which side chevrons would be on and I'll try and find a logic for them when I commit to attaching them to the models.


I'll be doing the Rough Iron banding next on all the edges and the remainder of the metal work.


The Autocannons also got base coated, the chevrons aren't too great but I hope to tidy them up and hide the discrepancies with highlights and ultimately weathering.


Round about this time with the Warglaives I think I really struggled trying to get my head round what order to do things in. With so much stippling and dry brushing involved, both in the red and brassy bronze which comes first? I had started to feel the same sensation as I progressed and so went back to those original posts but they weren't too revealing [typical!]. So I figured that with this stage its the metals, because every mistake and overspill of paint that goes on the red or yellow can easily be covered up with battle damage later. Of course I could catch red on the metal wehn I do but I think it will be a lot more controlled for those areas than the metal work, despite some of that banding being very fine detail. So, VGC Hammered Copper next [my slightly redder Balthasar Gold equivalent]. 

Monday 4 October 2021

Imperial Knight - Armiger Helverins base colours & texture #Dreadtober part 2

Afternoon #warmongers and #warhammercommunity it's the 'second' of #Dreadtober and I'm continuing my #Imperial Knights Armiger Helverins. I primed these - red oxide for the armour plates and I got two cans of Simoniz Matt black for the metals, but neither of them have had particular great coverage. The Red Oxide appears to be trying to behave like Contrast paint and the matt black appears to scratch off quite easily. I've pressed on regardless. Vermilion sponged on both and then one had Gamboge, as it will be full chevron.


I have 3 tubes of my signature Home & Bargain Vermilion Art Acrylic left. I couldn't find the opened ones so went to one of the newest. Bizarrely it is no longer the consistency of wet toothpaste and more like cream cheese. I tried mixing it with a big bottle of Vermilion I got from the Works, which is slightly thinner. It has the texture I'm after but did come out matt. There will be teething issues as I slowly transition from the H&B stuff so it's worth noting. Also, the red Helverin does have its smoke stacks switched so they're angled backwards, rather than vertically. It required a small trim of the pipes and some greenstuff to fit them around the arm mounts but it was just a test to see if it was possible.


Gamboge stippled on. I can pencil in the chevrons next to do the black lines and then already start highlighting the yellow!


All the armour plates are still attached to sprue so they're less fiddly to paint. I recall I glued them onto the model quite early on my Warglaives but I'll see how things go this way. I think I need some more sponging for the texture and all the metallic edges will be challenging,


This feels like I've made huge progress, in reality I'm probably not even 20% done. I've made more choices at adding the yellow and black chevrons on. I think that will help differentiate the units a bit more and give them more of an identity.


The guns are also getting up to speed and the shoulder joints too, but I haven't taken pics yet. Rough Iron metallics next and maybe add some highlight to the reds. I think I need to go back to my Warglaives to remind myself of the process... just for peace of mind.

Friday 1 October 2021

Imperial Knight - Armiger Helverins Big Build BASE TO DONE! #Dreadtober part 1

Afternoon #warmongers and #warhammercommunity it's the first of #Dreadtober and I've been Red Planet basing my two Armiger Helverins. It's quite a challenge to get the order right as both the basing and the metallics will require sponging/stippling and there will be mishaps.


I also hope to do the tiles as red marble, which will be difficult as the scale of the tiles is much smaller than my display board. I'll work it out though.


The second Helverin, the base has come out really cool considering it's scratch built. Hopefully the torso and guns will help balance how far back it looks. Of course I was planning on a different pose so it's composition is a bit odd now.


You see it looks like there's a lot of space on that side. It feels like it need a corpse in it. Maybe something to consider after it's finished.


Army Painter Rough Iron [Warplock Bronze equivalent] will be next on all the legs and ffet.


With that first post out of the way hopefully that shows my commitment to the month. Granted I haven't posted or done much hobby recently - mojo is low and I'm finding social media less pleasant than I'd like so I'm trying to take a break from it. But this community project is worthwhile and should help me get back into things in the right way. I also have a bit more time as my eldest is back at Uni. 
Here's my Great Big Big Build Base BLESSED VERDIGRIS Stamp of Approval.