Dark Angels - Macragge Tactical Squad - Chapter Symbol

Afternoon #warmongers and #warhammercommunity I've been #paintingwarhammer Dark Angels Macragge tactical squad. Chapter symbols up next. It'll come as no surprise that I considered decals for this. However, my Assault on Black Reach figures are freehand symbols, Dark Vengeance are sculpted on. Decals would be a nice experiment but #freehanding is a skill that requires practice. So, I'm taking that opportunity as it presents.

This is how I start them off with a central line of VGC Stonewall Grey

Then I flesh out the sword. I create a small triangle on the top left of the blade [the left of the handle]. I then do a longer triangle, weighted to the bottom, for the left of the blade. Then I repeat that on the right had side. I do a perpendicular line between the two diamond shapes, as the crossguard. Then two perpendicualr guard ends

Here you can see 8 of the wingless swords ready to go. I had some reservations about how hard this would be before starting[it's been a while]. I'd definitely recommend that this is a great 'save point' if your patience and concentration levels start to slip. Breaking things down into chunks is a great way to help overcome what might feel insurmountable.

The wings are next and the key here is the ends of the crossguard, as they both form a shape to curve the wing down and then follow the blade. It should stop parallel to the widest part of the blade, but you'll see I've gone longer in places. Two reasons for this - I hadn't paid too much attention to the actual symbols so hadn't spotted the end point. Also, they can look a little stumpy, so on occassion I did just extend them a bit to make the shape make sense. I then try to do the top most feather. This should be horizontal, parallel to the bottom of the shoulder pad. But you will notice that mine will angle up. Again, this is because I didn't pay attention to the actual symbol and also because it is quite difficult. So long as they match on either side it doesn't really matter.

You then have to fill in the two middle feathers. I rotate the figure in my hand a bit inbetween them, to ensure the angles are different. You do not want parallel line in this situation, they rotate perpendicular to the arc of the wing that goes round the crossguard ends.

Alterntavely I've seen people paint the wings like two solid fan shapes and then cut into it twice with Caliban Green [here it is for Deathwing and Brush and Boltgun have a great video that explains this approach. There's a clear advantage to this - you only have to cut in with those three green lines and the outer edge of the feathers will be smooth, whereas min all look a little sketchy.

As you can see the results are 'chunky', not perfect but I am happy with them. Despite that variety in them and some of the sketchiness I like them.

I don't know why they appeal to me. My brain is telling me they're not perfect, in some respects not even close to what the symbol should be but I'd describe them as having an earnestness about their execution - unapologetic. They're genuine and it just goes to show you shouldn't be afraid to freehand.

You don't have to be perfect, just take your time, take as much care as you can and the results will exceed your expectations because you know you tried. Anyway, these are getting close now. Some highlights on these next, pick out some more highlights elsewhere. The eye lenses are mostly done, just need the white dot highlights. Blessed verdigris needs to be applied. Should be done in a week or so [although by the time you read this they could be complete...], although my son is back from uni now so a little less hobby time than previously.

Dark Angels - Macragge Tactical Squad - Squad Arrows

Afternoon #warmongers and #warhammercommunity I've been #paintingwarhammer Dark Angels Macragge tactical squad. I've actually done a bit more than just the squad arrows, there's some additional shading gone on over the green.

But it was something that obviously needed doing. Freehanding an arrow isn't the hardest thing in the world but you have to be reasonably consistent. I'll let you be the judge on my success but overall they're not too bad. Even some of the taller and squishier ones seem OK, because they retain the overall shape and angle of the arrow head.

Some might expect 100% uniformity in their squad, well that's just wishful thinking for me. I do the best I can and part of me feels that each Space marine paints his own armour. I know that's not lore, although it might be for some chapters. But it's a nice idea that they're sat there decorating their own armour. I now there are serfs and artisans to do that, but even so I think it could happen.

 

Here's the process of how I did the arrows, the pics a re a little softened somehow, but you should be able to follow the process. So I start with a blank shoulder pad.

A 'bindi' dot for the tip of the arrow head. Centre of the pad, about a third or quarter down from the top.

I draw a line diagonally out from the dot.

And try to mirror it on the other side.

A horizontal line in from the edge of the arrow and then a vertical line down.

Repeat on the mirror side.

And fill in.

Obviously, it's far from perfect. Even the potato camera pics can't hide some of the imperfections. But, there are highlights and shading to come and you can neaten up the arrow edges with Caliban Green. I know there are highlights there that Caliban Green will just cut through and you might think it needs to match the highlights, but it really doesn't. The darker green will act like a little outline and help the red stand out. So don't worry about perfection you can tidy all of this up and it's great practice for the next step - the freehand Chapter symbol!

Dark Angels - Deathwing Land Raider Redeemer - TO DONE! [White Pics]

Afternoon #warmongers and #warhammercommunity I've been #paintingwarhammer on my Dark Angels Deathwing Land Raider Redeemer. Here's all the white background pics.

A different prospect altogether when it's not on the red background. All those subtleties in colour just jump out.

The heat bloom on the Flamestorm Cannon isn't great, or perhaps the blessed verdigris is bit clumsy but I'm happy with  most of my other choices.

The weatherign powder in particular adds just enough variety at the the bottom of the tank.

It may not come with a Red Planet BASE! but that dusting of rust orange gives the illusion of it.

I carry on with this I'll end up wanting to revisit all my models and give them dirty greaves...

Green doors may well have added a little more variety on the model and yet more continuity with the rest of the army but I will live with my choices.

Alongside the fact the gunshields are back-to-front. I did also consider the Indomitus decal sheet has a white checkerboard strip that I thought would be cool on the shields, if I could source a second one but thought it might be too fussy,

The Hunter Killer Missile appear all wobbly looking now. I was sure I'd glued it much straighter than that. It got a bit of a bang at some point which led me to believe that was the result, but it still feels pretty solid so I don't know why it's off-kilter.

 

The lenses still look OK. I didn't Tamiya Clear them in the end. The drop of Vernidas varnish to add a proper lense feel works but I think it works better with the Tamiya Clear process. 

I had to retain all that highlighting though, it would have been lost otherwise.

The green lenses look OK too, they aren't as well executed as the original red ones but the Tamiya Clear Green X-25 makes them look a little more realistic than the un-Clear orange and red.

I may well add some purity seals on these front wings as when the Land Raider earns the right to bear them.

A quick splash of Army Painter Soft Tone on the Mechanicum banner decal toned down the white enough to help it belend in.

Again, Camera360 isn't necessarily giving me the quality of imagers I hoped for, so I tried some with my native camera app.

I don't know if that improves anything for you as the viewer.

I think the depth of field doesn't help, the phone does have a dedicated macro camera but most everyone said zooming in with the main camera gives better results.

There we have it. Back to Greenwing and Ravenwing next.

Dark Angels - Deathwing Land Raider Redeemer - TO DONE! [Red Pics]

Afternoon #warmongers and #warhammercommunity I've been #paintingwarhammer on my Dark Angels Deathwing Land Raider Redeemer and it is TO DONE!

Oh boy, this has been a challenge. It was roughly a year ago that I picked this back up with the plan to finish it. I felt motivated and confident.

Then the reality kicked it and it was easy to set it aside to find other things to focus on. It's come together brilliantly in the end though.

There's an irony that I painted over the original green doors - it was basecoated in bone, red for the weapons and green for the doors, although that was an overspray of a Blood Angels base. But now I remove all the green it could have benefitted from a little green, to match my Deathwing Knights - see later pics.

The right quartered heraldry was and addition, as was the number 1. I could have done that as a decal but I freehanded the lot. I think it tapers a bit towards the bottom, the scuff marks don't help to dissuade from the illusion but I'm still quite chuffed with the result.

As you'll know by now, the custom decals were an experiment. I felt the top of the tracks were too plain and thought I'd give them a shot. The process was deeply flawed, with the decal paper jamming in the printer, but luckily I had sufficient success to get some viable decals and they were applied SO successfully.

 If I'm honest, the top is now SUPER-BUSY compared to the SUPER-PLAIN. But it's better with, than without.

 

It's pretty cool model in the end. Quite the centrepiece, even if they're a bit rubbish.

Now this could be it's purpose - delivering the Deathwing Knights and you can see how just a small amount of green on tank would have linked it a bit more with the Knights.

I do have another 5 Knights to make up at some point. It would be nice to have all my terminators done. 

I don't think I could field a mono Deathwing army, but the 15 or so terminators I still have to build/paint would look pretty cool.

Chances are I never will field them, playing Dark Angels just feels far too complex for me to get the best out of them. I still need the Space Marine Codex and the Dark Angel Codex Supplement - too many rules for my old brain.

At least the Tyranid Codex is pretty simple and self-contained. 

Imperial Knights too are easier to play than other armies, it's just the more competitive ones are more complex to play.

There we go and here's the Great Big Granite Stamp of Approval - TO DONE!